Filter
Top Products
A-61527 May 2006 67
Scan Area dialog box The Scan Area dialog box allows you to define the amount of image
data which is returned to the host. The area can be defined in Pixels,
Inches or Centimeters.
The Scan Area dialog box is only available when Fixed to Transport or
Relative to Document is selected on the Scanner Settings dialog box.
Page size and layout the default paper size is set when a scanner
is first selected. You can choose a different paper size using the drop-
down list box.
NOTE: The Page Size and Page Layout selections also appear on the
Scanner Settings dialog box. If you make a change on the Scan
Area dialog box, the same selections will appear on the Scanner
Settings dialog box and vice versa.
The Page Layout area allows you to select either Portrait or
Landscape.
Portrait will display the image orientation in the shape of a
conventional portrait, where height is greater than width.
Landscape will display the image orientation in the shape of a
conventional landscape painting, where width is greater than height.
Area:
X the distance from the left end of the scanner to the left-edge of the
scanning area.
Y — the position from the top end of the document to the top end of the
scanning area.
Width — the width of the scanning area.
Height — the height of the scanning area.
Snap causes the dimensions of the Area box to be controlled in fixed
1/8-inch increments. This option is not available in Pixels mode.