Konica Minolta 1050E Scanner User Manual


 
7
Using the Network Scanner Features
7-16 bizhub PRO 1050/1050e Scanner
Using the Network Scanner Features Chapter 7
To deselect the Name, press the selected Name again.
If you input a destination manually, refer to "When an FTP server is
Input Manually" on Page 7-17.
7 Press the [Scanner Setting] key.
The Scanner Setting Basic screen
appears.
8 Configure the necessary items.
For more information on the
configurations on the Scanner
Setting Basic screen, refer to
"About the Scanner Setting
Basic Screen" on Page 7-26.
9 Set an original and press the [Start] button.
The original is scanned, and the scanned data are sent to an spec-
ified destination.
The Reserved JOB Confirmation screen appears.
10 To send another scanned data,
press the [Yes] key. To finish the
scanning, press the [No] key.
Pressing the [Yes] key brings
you back to the Scanner Set-
ting Basic screen. Return to
step 8 and repeat the proce-
dures.