Filter
Top Products
4
About the Copied Data Processing Features
4-34 bizhub PRO 1050/1050e Scanner
About the Copied Data Processing Features Chapter 4
4.9 Changing Data Transmission Method to PC
There are 3 methods to transmit copied data to the computer: [Transmit to
PC], [Operate on PC] and [FTP/SMB].
!
Detail
Network settings are needed to transmit copied data to a computer. For
more information, contact your administrator.
PageScope JobEditor and PageScope JobEditorServer can be installed
on Windows 2000/XP Professional.
PageScope JobEditor and PageScope JobEditorServer for USA are ex-
cluded.
About how to obtain PageScope JobEditor and PageScope JobEditorS-
erver, contact your service representative.
Change over [Transmit to PC], [Operation on PC] or [FTP/SMB] in the follow-
ing procedure.
Transmit to PC
If you configure the automatic transmission to a PC, the computer specified
on the copier can automatically receive copied data through PageScope
JobEditorServer.
Transmit to PC Copied data can be automatically transmitted to the computer
by setting the computer to which the data is to be transmitted on
the copier and installing and setting the utility tool, PageScope
JobEditorServer, to the computer.
Operate on PC By installing the utility tool, PageScope JobEditor, to the compu-
ter on the network and connecting the copier using this tool,
copied data can be unloaded to the computer.
FTP/SMB Copied data is converted to PDF/TIFF data and transmitted to
the FTP or SMB server.