Filter
Top Products
|
User’s Manual 111
Setting the Batch TX Time Function
!
Locations used for Delayed Batch Transmission
must be programmed into
Speed Dial numbers 31 through 40
before the Batch TX Time may be set.
1 Press Menu/Exit to enter the menu.
2 Press ᮢ to select Location Program. Press Enter.
3 Press ᮢ to select Batch TX Time. Press Enter.
4 Enter the Speed Dial number of the desired location.
Use the numeric keypad to enter the number.
Press Enter.
5 When prompted, enter the desired time.
Press Enter.
!
Use the 24-hour format to enter times.
For example, 0800 is 8:00 AM, 2000 is 8:00 PM.
Remember that delayed batch transmissions are sent at
the same time every day!
6 Press Menu/Exit to exit.