Filter
Top Products
|
Konica FAX 9930168
Message Confirmation Report Options
Message Confirmation Report (MCF) is a very convenient
feature that is often used on a daily basis to ensure that faxes
were sent or arrived at the proper destinations. Use the
following functions to set MCF parameters.
MCF (Single-Loc)
Speed Access no. 70
Set to ON, an MCF automatically prints for single location
transmissions. When set to OFF, no report prints.
MCF (Multi-Loc)
Speed Access no. 71
Set to ON, single and multiple location transmission MCFs
automatically print. When set to OFF, no report prints.
Image in MCF
Speed Access no. 72
Set to ON, a portion of the first page of the fax transmitted
prints in the MCF. When set to OFF, no image prints in the
report.
Err. Report (MCF)
Speed Access no. 73
Set to ON, an error report automatically prints if a fax
communication is not successful.
When set to OFF, the report does not automatically print.
!
The Result Code 0000 on an MCF Report means that
the fax communication was successful.