Filter
Top Products
1.2 Access
1-3
Using PageScope Web Connection Chapter 1
1.2 Access
PageScope Web Connection can be accessed directly from a Web browser.
1. Start the Web browser.
2. In the Address bar, enter the IP address of the image controller as shown
below. Then, press the [Enter] key.
http://<IP address of the image controller>/
(Example) When the IP address of the image controller is 192.168.0.10:
http://192.168.0.10/
3. The PageScope Web Connection screen appears.
1.2.1 Operation
PageScope Web Connection operation is identical to that for Internet Web
pages. You can click a link on the Web page to jump to the link destination or
click the [Back] or [Forward] button to display the previous or next page.