Filter
Top Products
1.5 Administrator Mode
1-44
Using PageScope Web Connection Chapter 1
LDAP Setting
This screen appears when you click the [LDAP Setting] menu on the
[Network] tab.
This screen is used to specify settings concerning LDAP search functions.
Note
• When using LDAP search functions with Fiery, a Kerberos
authentication server (including DNS functions) must be provided.
• Because DNS name resolution is required with Kerberos authentication,
the following DNS settings must be made to Fiery settings in advance.
• DNS server IP address: Input the DNS server IP address.
• Domain name: Input the name of the domain to which Fiery belongs.
• Host name: Input the Fiery host name.
• If the settings for Time Zone / Date / Time in Fiery do not match the time
settings in the LDAP server, then it may not be possible to connect to the
LDAP server.
• If Internal Error=-5 is displayed when searching, this may mean that the
LDAP server is not configured correctly. If this happens, please check
LDAP server settings.