Filter
Top Products
2.14 Registering the One-Touch Key and Temporary Registration Key
2-47
Using the Scanner Mode Chapter 2
When Scan to FTP Server is selected
Destination Name:
Enter the name of the temporary registration key.
Setting Up to 12 characters
IP Address: Set the IP address of the FTP server.
User Name: Enter the name used to log into the FTP server.
Password: Enter the password used to log into the FTP server.
Directory: Specify the location (directory) for storing the image
data on the FTP server.
(To specify the default folder, leave this blank.)
Use Default Proxy:
Set whether to use the proxy server.
Notification Address:
When using the e-mail notification function, enter the
destination mail address.
Setting Up to 72 characters, one address
* Scan Mode Settings (same as for Scan to E-mail)
When Scan to Mailbox is selected
Destination Name:
Enter the name of the temporary registration key.
Setting Up to 12 characters
Mailbox Name:
Select the transmission destination mailbox.
The list shows the mailboxes that have been registered
using [Mailbox] (p. 2-28).
Notification Address:
Enter the notification destination mail address.
Setting Up to 72 characters, one address
• By using the [Search Key] and [Lookup Address] buttons, you can use
the LDAP functions to search and input the [Notification Address]. For
details, see “When Scan to E-mail is selected” on page 2-37.