Filter
Top Products
2.8 Setting the Sender (From) Address
2-21
Using the Scanner Mode Chapter 2
2.8 Setting the Sender (From) Address
You can carry out the following steps to specify the mail address that appears
in the sender (From) line of the mail transmitted by Scan to E-mail, Internet
FAX transmission, e-mail notification function, and URL notification
function.
1. Show the setup screen from the controller operation panel.
2. Select [Network Setup] — [Service Setup] — [E-Mail Setup] and enter
the following settings.
[Fiery Email User Name]:
Specify the mail user name of the sender.
[Fiery Email Domain Name]:
Specify the mail server domain name to which the
sender belongs.
Note
• The sender (From) address is Fiery Email User Name@Fiery Email
Domain Name.