Filter
Top Products
1.3 Screen Configuration
1-7
Using PageScope Web Connection Chapter 1
1.3.2 Changing the Administrator Password
You can carry out the following steps to change the administrator password.
Use the copier operation panel to make the change.
1. On the copier, press the [Utility] key.
2. Touch [Admin. Mode].
3. Input Administrator Code and touch [Enter].
4. Touch [Admin. Set] and then touch [3/4].
5. Touch [PSL Administrator Code Change].
6. Input Current Administrator Code and touch [Enter].
Note
7. Input New Administrator Code and touch [Enter].
8. Input Retype Administrator Code and touch [Enter].
• The default administrator password is 0000.