Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-725XLA Presentation Switcher / Scaler
8
Table 1: Front Panel VP-725XLA Presentation Switcher / Scaler Features
# Feature Function
1
INPUT
SELECTOR
Buttons
YC Selects one of the s-Video (Y/C) sources (from 1 to 4)
2 CV Selects one of the CV sources (from 1 to 4)
3 UXGA Selects one of the UXGA sources (from 1 to 4)
4 HDMI Selects one of the HDMI sources (from 1 to 4)
5 USB Press to select the USB
1
source and also run/stop the slideshow (see
section
8.1.8)
6 COMP Selects one of the Component video sources (from 1 to 4)
7 POWER Switch Illuminated switch for turning the unit ON or OFF
8 IR Receiver / LED Green when ON; red when OFF
2
9 FREEZE Button Freezes the output video image
3
, as well as pause the slideshow
(see section
8.1.8)
10 PIP Button Selects the picture-in-picture function
3,4
11 MENU Button Displays the OSD Menu screen (or returns to the previous level in
the OSD screen)
12 ENTER Button Moves to the next level in the OSD screen
3
Press for about 5 seconds to lock/unlock the front panel buttons
13 - Button Decreases the range by one step
3
Decreases the volume level, when not in the OSD menu
14 + Button Increases the range by one step
3
Increases the volume level, when not in the OSD menu
15 DOWN Button Moves down one step (in the same level) in the OSD screen
3
, or
moves to the next slide when running a slideshow (see section
8.1.8)
16 UP Button Moves up one step (in the same level) in the OSD screen
3
, or moves
to the previous slide when running a slideshow (see section
8.1.8)
17 USB Connector Connect to a USB drive to read JPEG files
18 OSD ON Button Activates/deactivates access to the OSD Menu
3, 5
19 LCD STATUS Display Displays the status
20
MIC
CONTROL
6
Button
OVERRIDE
7
Routes the signal from the microphone to the Master output instead
of from the Line, whose signal is blocked
21 MIX
7
Routes the combined signals from the Mic and the Line to the
Master output
1 JPEG files on a USB memory stick, up to a maximum size of 2048x1536
2 OFF in this case means that the outputs and the front-panel are disabled
3 Applicable to the Scaler outputs only
4 See section
7.4
5 The OSD ON front panel button is activated (illuminated) by default, and pressing the MENU front panel button (or the
MENU key on the infrared remote control transmitter (see
Figure 27)) displays the OSD Menu. To block display of the OSD
menu, press the OSD ON front panel button (or the OSD key). This deselects the OSD ON front panel button (which is no
longer illuminated). The front panel LCD operates independently of the OSD, for example, when the OSD is OFF, the LCD is
still operational
6 Only one of the group buttons can be ON, or all buttons can be OFF (pressing a button will select that button, and turn OFF
the previously selected button. If the selected button is pressed, it will turn it OFF)
7 When no MIC CONTROL button is selected, the audio input is routed to the MASTER output, ignoring the Mic input