Filter
Top Products
Configuring and Controlling the VP-725XLA
27
27
8 Configuring and Controlling the VP-725XLA
This section describes how to configure and control the VP-725XLA via the:
• OSD menu (see section
8.1)
• LCD display (see section
8.2)
• Infrared remote control transmitter (see section
8.3)
You can also control the VP-725XLA via the Ethernet (see section
8.4)
8.1 Configuring the VP-725XLA via the OSD MENU Screens
The OSD superimposes a menu on the screen from which you can configure
and control each input signal on your VP-725XLA, using the MENU, ENTER,
-, +, UP and DOWN OSD buttons on the front panel and the remote
transmitter.
To use the OSD menus:
1. Select the desired input signal.
2. Use the menu buttons as follows:
Press the MENU front panel ON button or the MENU key on the
infrared remote control transmitter (see section
8.3) to display the
main MENU screen
1
, which displays eight interactive icons
2
(see
Figure 12)
Press the MENU front panel OSD button or the MENU key on the
infrared remote control transmitter to move to the previous level in the
OSD screen (Esc)
Press the + and – buttons to select menu icons and then press ENTER
Use + and – buttons to increase and decrease the (numerical) rate
respectively
Figure 12: MENU Items
1 Each icon represents a Level 1 function. In addition to Level 1, the OSD structure includes Level 2 (a subset of level 1),
Level 3 (a subset of level 2) and a numerical range
2 The Audio menu is not applicable for the VP-725xl