Filter
Top Products
Your VP-725XLA Presentation Switcher / Scaler
9
9
# Feature Function
22 TALKOVER
7
Routes the selected input to the output until an audio signal is
detected on the microphone input. When this happens the selected
input is faded out (to be faded back in when no input is detected on
the microphone)
23
AUDIO
LEVEL
1
Button
L
INE
Press this button and adjust the audio level using the –/+ buttons
(see section
7.3.1). The level is displayed in the LCD Display and
OSD
24 MIC
25 OUT
2
26
SELECT
3
Buttons
V
IDEO
GROUP
Select the Video Group operation mode
4
; within each group, select
which input (from 1 to 4) to switch to the output. The selected input
button within each group is illuminated. If the AUDIO GROUP button
is also illuminated, the audio follows the video
27 AUDIO
GROUP
Press to select the Audio Group mode
4
: within each group, select
the audio input (from 1 to 4) from each group for switching. If the
VIDEO GROUP button is also illuminated, the audio follows the
video
28 SCALER Select the Scaler mode
4
: press an input button (1 of 21), to select
the input to be scaled at the SCALED OUTPUTS. The selected
input button illuminates. If the MASTER AUDIO button is also
illuminated, the audio follows the video
29 MASTER
AUDIO
Press to select the Master Audio mode
4
: press an input button (1 of
20), to select the audio input to switch to the MASTER OUT terminal
block connector. The selected input button illuminates. If the
SCALER button is also illuminated, the audio follows the video
Figure 2 and Table 2 define the rear panel of the VP-725XLA:
1 Only one of the group buttons can be ON, or all buttons can be OFF (pressing a button will select that button, and turn OFF
the previously selected button. If the selected button is pressed, it will turn it OFF)
2 Selecting OUT when the Audio Group button illuminates, lets you select the group (scrolling through CV, YC, VGA,
Component and DVI, displaying the selection on the LCD (and OSD when appropriate) using the UP and DOWN buttons
3 The VIDEO GROUP and AUDIO GROUP buttons set can be pressed simultaneously or independently; the SCALER and
the MASTER OUTPUT buttons set can be pressed simultaneously or independently
4 When selected, this button illuminates