Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-725XLA Presentation Switcher / Scaler
24
For example, if CV input 3 audio level is set to 2 in the AUDIO GROUP
mode, and then you set it at 5 in the MASTER AUDIO mode, the audio level
will still be 5 (not 2) when returning to the AUDIO GROUP mode.
Figure 11: Adjusting the Audio Input and Audio Output Levels
7.3.2 Using the Microphone CONTROL Modes
The MIC CONTROL
1
section buttons include these:
• Override
2
, that blocks the input signal and enables the microphone input
to be routed to the Master output
• Mix, that sends the combined signals from the microphone and the line to
the Master output
• Talkover, that routes the selected input to the output, until an audio
signal is detected on the microphone input. When detected, the selected
input is faded out (to be faded back in when no input is detected on the
microphone)
1 Only one of the three buttons can be ON, or all three buttons can be OFF (pressing a button will select that button, and turn
OFF the previously selected button. If the selected button is pressed, it will turn it OFF)
2 When no MIC CONTROL button is selected, the audio input is routed to the MASTER output, ignoring the mic input