Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-725XLA Presentation Switcher / Scaler
22
7.2 Switching an Input to an Output
This section describes how to switch an input to an output when the
VP-725XLA operates as five independent switchers (see section
7.2.1) and
when it functions as a scaler (see section
7.2.2).
To switch an input to an output you have to first select the operating
mode via the SELECT button and then select the desired inputs via the
INPUT SELECTOR buttons.
7.2.1 Switching the VP-725XLA as Five Independent Switchers
When operating the VP-725XLA as five independent switchers, the selected
input in each group is switched to the output of that group.
To operate the VP-725XLA as five independent video switchers
1
:
1. Press the VIDEO GROUP button
1
.
Only the VIDEO GROUP button illuminates.
2. Press an input button to switch to the output for each of the five
independent switchers. For example, in the:
UXGA group, press INPUT 1
HDMI group, press INPUT 1
2
CV group, press INPUT 2
YC group, press INPUT 3
COMP group, press INPUT 4
To operate the VP-725XLA as five independent audio-video switchers:
1. Press both the VIDEO GROUP and the AUDIO GROUP buttons.
Both buttons illuminate.
2. Press an input button to switch to the output for each of the five
independent switchers.
The Audio follows the video.
7.2.2 Switching the VP-725XLA as a Scaler
To operate the VP-725XLA as a scaler, press the SCALER button
3
and then
switch one of the 21 inputs to the scaled video outputs. If you also press the
MASTER AUDIO button, the audio follows the scaled video output.
1 Alternatively, press the AUDIO GROUP button to switch the audio signal only
2 The HDMI Group Output is momentarily lost during switch transitions in the unit
3 The button illuminates