Filter
Top Products
Printer Environment
1-32
1.5.8 Serial Interface Parameters
This setting is only available if you have the optional
Serial Interface Kit
(IB-10E)
installed on your printer. You can change the baud rate, data bits,
stop bit, parity, and flow control for the serial interface. If these settings
are changed, you must also change the serial interface parameters on your
computer.
1
Click the
MENU
button on the start-up screen.
2
The
Menu
dialog box appears. Double click
Interface settings
and
Serial
in that order. The serial interface items are displayed on the
screen.
3
Click the item you want to change, then select the value you want to
set from the pull-down menu.
Serial interface items
Interface settings
Serial
Baud rate