Kyocera FS-1000 Printer User Manual


 
Print Quality Problems
4-3
4.2 Print Quality Problems
As the following table shows, there are many possible causes of print
quality problems, such as blank output as. The troubleshooting procedure
for each type of problem is explained below. If you still can not solve the
problem, contact your Kyocera dealer.
(Continued on next page)
Printed Results Corrective Action
All-black printout
Contact your Kyocera dealer.
Dropouts, horizontal streaks, stray dots
Clean the charger wire.
Open the printer's top and front covers. Remove the
process unit from the printer and slide the charger knob
back and forth to clean the charger wire.
(See
Chapter 3
)
Black or white vertical streaks
Check the operator panel.
When the (toner) indicator is flashes, install a new
toner kit. Clean the printer after replacement.
(See
Chapter 3
)
Clean the charger wire.
Open the printer's top and front covers. Remove the
process unit from the printer and slide the charger knob
back and forth to clean the charger wire.
(See
Chapter 3
)
Check the position of the charger cleaner knob
Open the printer's top and front covers. Remove the
process unit from the printer. Make sure the charger
cleaner knob is restored to its home position.
(See
Chapter 3
)