Filter
Top Products
Indicators
4-11
4.3.3 Error Messages
With the following errors, printing continues when you press the printer's
key. You can confirm these errors by printing a status page. (See pages
1-4
and
1-5
.)
Indicator Remote Operation
Panel display
Corrective Action
KPDL Error
Press GO
Current print processing cannot continue.
(Only occurs if the optional
KPDL2 Upgrade kit
[PK-6]
is installed on your printer.)
Press the key to resume printing. You can
abandon printing by pressing the key.
Memory overflow
Press GO
Printing cannot continue because there is
not enough memory.
Try adding more memory. Press the key to
resume printing. You can abandon printing by
pressing the key.
Print overrun
Press GO
Current print processing cannot continue
due to complex data.
The data transferred to the printer was too complex
to print on a page. Press the key to print data as
far as it was stored. You can abandon printing by
the key.
To release the page protect mode, send the
following command to the printer from the
Remote Operation Panel
after this error
occurs:
!R! FRPO R5, 1; EXIT;
RAM DISK err ##
Press GO
Check the error code displayed in ## and
refer to the appropriate description below.
01: Abnormal format. Try turning the power off
and on again.
02: RAM disk mode is Off. Turn RAM disk mode
On.
03: Cannot write to the disk system because it is
write protected. Remove the write protection.
04: No disk space. Clean up files.
05: Specified file not on disk.
06: No memory for use by disk system. Expand
printer memory.
10: Cannot format disk because host data is
spooled there. Format the disk after Ready is
displayed.
98: Unable to read files during sorting (file does
not exist, or is corrupted).
Note