Filter
Top Products
Indicators
4-6
4.3.1 Maintenance Messages
The following table lists error messages that can be dealt with by the user.
Read the explanations carefully.
(Continued on next page)
Indicator Remote Operation
Panel display
Corrective Action
Add paper <paper source>
<size>
The paper has run out. Add paper to the
paper cassette or MP tray.
The paper source and paper size are displayed in
the
Remote Operation Panel
.
Press the key to switch, the paper source
between the MP tray, the paper cassette, and the
paper feeder (optional) in that order.
The paper cassette is not closed securely.
Close the paper cassette properly.
Load MP tray
<paper size>
The cassette paper size and data paper size
are not the same.
The printer feeds from the MP Tray when the page
in the paper cassette is a different size than that
specified in the print data. Set paper of the size
specified in the print data into the MP tray, then
press the key to resume printing.
When you want to feed from a source other than the
MP tray, make sure there is no paper in the MP
tray, then press the key to switch the paper
source. The printer prints on the paper size set in
that particular paper source.
Paper jam
Open the printer and clear the paper jam.
For details on how to clear paper jams, see section
4.4
.
Replace Toner
TK-17
There is no more toner in the toner container.
The printer has stopped because there is no more
toner. Replace with a new toner kit. After replacing,
be sure to clean the printer. (See
Chapter 4
)