Filter
Top Products
3-5
Copying
Using Programs
If there are settings that you frequently change from the default state, register the settings in a program. You can simply
select the program number as needed to recall those functions.
Copy functions can be registered in three programs.
The programs below have been preregistered. The registered contents can be re-registered for easier use in your
environment.
Copying Functions
Copying functions are as follows. These functions are all configured from KYOCERA Client Tool.
Item Program1 Program2 Program3
Original size A4 (Letter) A4 (Letter) A4 (Letter)
Original image Text Text+Photo (300 dpi) Photo
Copies 1 1 1
Collate On On On
Original orientation Top Edge Top Top Edge Top Top Edge Top
Zoom Auto Auto Auto
Density Darker (+3) Lighter (-2) Normal (0)
EcoPrint Off On Off
Combine Off 2in1 (Left to right) Off
Note For details on program registration and the various functions, refer to Program Settings on page 2-28.
Refer to Basic Operation on page 3-2 for recalling programs.
Item Description
Original size Specify the size of originals being scanned.
Value: Executive, Letter, A4, A5, A6, B5 (JIS), B5 (ISO), Custom, 16K, Statement
Original image Select image quality suited to the type of original.
Value: Text + Photo (300 dpi or 600 dpi), Photo, Text
Collate*
* When this function is selected, printing starts after all pages to be copied are scanned. Place one page at a time
and press [Start]. When you have finished scanning all pages, press [] or [] to select - and press [Start]
again to start printing.
Scan multiple originals and deliver complete sets of copies as required according to page
number.
Value: Off, On
Zoom Adjust the magnification to reduce or enlarge the original image.
Value: 100%, Auto, Fixed, Custom
Density Adjust density using 7 levels.
Value: Lighter (-3), Lighter (-2), Lighter (-1), Normal (0), Darker (+1), Darker (+2), Darker (+3)
EcoPrint Use EcoPrint to save toner when printing. Use this function for test copies or any other occasion
when high quality print is not required.
Value: Off
, On
Combine* Combine 2 or 4 original sheets into 1 copied page. You can select the page layout.
Value: Off, 2in1, 4in1
Note To set a function from KYOCERA Client Tool, refer to Default and Program Settings on page 2-28.