Filter
Top Products
Configuration
1-91
Configuration
This section explains the details of printer settings. The following items
are covered.
• Page Protect Mode
• Linefeed (LF) Action
• Carriage-Return (CR) Action
•Wide A4 Pitch
•Print Density
•Total Printed Pages
• Toner Counter Resetting
• Message Language
• Automatic Form Feed Timeout
• Sleep Timer Setting
•Printer Resetting
• Resource Protection
• Alarm (Buzzer) Setting
• Auto Continue Setting
Page Protect Mode
The Page Protect Menu does not normally appear, however, Page Protect
will be forcibly set to On if a print overrun error occurs due to insufficient
printer memory. When this has happened, be sure to reset Page Protect
to Auto (default) in order to maintain the optimum use of printer memory.
1
Press the MENU key.
2
Press the or key repeatedly until Page set > appears.
3
Press the > key.
4
Press the or key repeatedly until >Page Protect appears.
5
Press the ENTER key. A blinking question mark (?) appears.
Page set >
>Page Protect
On
>Page Protect
? On