![](http://pdfasset.owneriq.net/d/6b/d6b38004-063c-4b82-abd5-bcd33a14fef1/d6b38004-063c-4b82-abd5-bcd33a14fef1-bgd5.png)
RS-232C Cable Connection
C-13
In DOS, enter the following commands:
C:\>MODE COM1:96,N,8,1,P
C:\>MODE LPT1:=COM1
To test the interface, enter the following:
CTRL P
C:\>DIR
CTRL P
The software settings made using the above procedures are temporary. On
most computers, permanent settings must be made with DIP switches.