Filter
Top Products
Configuration
1-105
Auto Continue Setting
If an error that still allows you to continue printing occurs (Memory
overflow Press GO, Print overrun Press GO, KPDL error Press
GO, and File not found Press GO), the next received data is
automatically printed after a set period of time elapses. For example, if the
printer is shared over a network as a network printer and one person
causes one of the above errors, after the set period of time elapses, the data
sent from the next person is printed.
1
Press the MENU key.
2
Press the or key repeatedly until Others > appears.
3
Press the > key.
4
Press the or key repeatedly until Auto Continue > appears.
5
Press the ENTER key. A blinking question mark (?) appears.
6
Select On or Off using the or key.
7
Press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
Others >
>Auto Continue >
Mode On
>Auto Continue
Mode ? On