Filter
Top Products
Connect Copy (Option)
246
4
Using Connect Copy
You can select Connect Copy mode from either of the two connected machines
by pressing the
[
Connect
]
key. The machine you use becomes the master unit,
and the other machine the sub-unit.
Limitation
❒
Once Connect Copy is selected, you must carry out all operations on the mas-
ter unit.
A Make sure the machine is in copy mode.
Note
❒
If user codes are turned on, enter a user code programmed in the master
unit with the number keys (up to 8 digits) then press the
[
#
]
key. You don't
need to enter the user code for the sub-unit.
Reference
See
⇒
P.70
“User Codes”
.
B Press the
[
Connect
]
key on the machine that is to be the master unit.
When the key darkens, the two machines are connected.
❖
Master unit display