Filter
Top Products
Setting Originals
27
2
B Set the first page of your original face down on the exposure glass and align
it to the rear left corner.
1: Reference mark
2: Scale
C Lower the document feeder.
Setting Originals in the Document Feeder
Note
❒
The last page should be on the bottom.
❒
Do not stack originals beyond the limit mark on the side fence of the docu-
ment feeder.
❒
When copying thin originals (40 – 52 g/m
2
, 11 – 14 lb, Bond), set one page at
a time in the document feeder or on the exposure glass to avoid damage due
to multi-sheet feeds (several pages fed together at the same time).
❒
Originals in pencil or other similar media may get slightly smudged after be-
ing scanned through the ARDF. To avoid this, you can set them on the expo-
sure glass instead.
❒
As a rule, one-sided originals are delivered to the ARDF external tray, and
two-sided originals to the ARDF tray.
Reference
For originals that the document feeder can handle, see
⇒
P.15
“Originals”
.
To set a stack of originals in the document feeder
A Adjust the guide to the original size.
ND1C01EE
1
2