Filter
Top Products
What to do if Something Goes Wrong
266
5
The [
Connect
] key does not
appear on the display.
The master unit is in Preset
Jobs mode.
Exit Preset Jobs mode in
one of the following ways.
❖
If you are still selecting
copy settings and
copying has not started
yet :
Press the [
Clear
] key
then remove the origi-
nals set in the master
unit document feeder.
❖
If Preset Jobs mode is
in progress :
Press the
{
Stop
}
key,
follow the instructions
on the display then
press the [
Cancel
] key.
Reference
See “Preset Jobs”
⇒
P.60
“Job Preset”
The [
Connect
] key does not
appear on the display.
The “Connect Copy” of
User Tools setting is set to
“No”.
Change the setting to
“Yes” or press the [
Con-
nect
] key on the other unit.
Reference
See “Connect Copy”
⇒
P.265
“Connect Copy”
The Connect Copy cable is
damaged.
Please contact your service
representative.
L
indicator is lit. Follow the instructions
shown on the display.
Machine Status Cause Action