Filter
Top Products
Sort
45
2
To set the original on the exposure glass or in the document feeder using
Batch/SADF mode
Reference
⇒
P.32
“Batch/SADF Mode”
.
A Set the first page of your original, then press the
{
Start
}
key.
Note
❒
The last page should be on the bottom.
B After it has been scanned in, set the next original then press the
{
Start
}
key.
Note
❒
Set the original in the same direction as the first one.
C After all originals have been scanned in, press the
{
#
}
key.
The copies are delivered to the tray.
To stop scanning temporarily
A Press the
{
Stop
}
key to stop originals being scanned into memory.
To resume scanning
A Press the
[
No
]
key to resume scanning.
Note
❒
Scanned images in memory are not cleared.
To stop scanning and clear all scanned images from memory
A Press the
[
Yes
]
key.
If memory reaches 0 %
Scanning will be stopped if the size of scanned image data exceeds memory ca-
pacity.
Note
❒
There is enough memory to store approximate 1,000 originals of A4, 8
1
/
2
"
×
11" size. The number of originals that can be stored in memory varies depend-
ing on the memory settings and original type.