Filter
Top Products
What to do if Something Goes Wrong
286
5
x
Clearing Misfeeds
R
CAUTION:
Important
❒
When clearing misfeeds, do not turn off the operation switch or your copy
settings will be cleared.
❒
To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
❒
If paper misfeeds occur repeatedly, contact your service representative.
Note
❒
More than one misfeed area may be indicated. In this case, check every appli-
cable area. Refer to the following charts: A, B, C, D, U, P, R (R1 – R6), Z
❒
You can find a sticker explaining how to remove misfeed paper inside of the
front cover or inside of the finisher.
•
The fusing section of this equipment might be very hot. You should be very
careful that you don't touch this section when removing the misfed paper.