Filter
Top Products
Configuration Using Web-Manager
WiPort™ User Guide 4-3
Figure 4-2. Network Settings
Automatic IP Address Configuration
To automatically assign an IP address and its network configuration:
1. Click Network from the main menu.
2. Select Obtain IP address automatically.
3. Enter the following (as necessary):
Disable BOOTP Leave the checkbox empty to enable Bootstrap Protocol
(BOOTP). The BOOTP server automatically assigns the IP
address from a pool of addresses.
Disable DHCP Leave the checkbox empty to enable Dynamic Host
Configuration Protocol (DHCP). DHCP automatically assigns
a leased IP address to the WiPort unit.
Disable Auto-IP The WiPort generates an IP in the 169.254.x.x address range
with a Class B subnet. Select the checkbox to disable this
feature.
Host Name
Enter the name of the host on the network.
Note: Disabling BOOTP, DHCP, and Auto-IP (i.e. all three checkboxes) is
not advised as the only available IP assignment method will then be ARP or
serial port.
4. Click the OK button when finished.
Static IP Address Configuration
To manually assign an IP address and its network configuration: