Filter
Top Products
Contents
WiPort™ User Guide v
Disable TFTP Firmware Upgrade _____________________________________________ 5-21
Disable Port 77FE (Hex)____________________________________________________ 5-21
Disable Web Server _______________________________________________________ 5-22
Disable Web Setup ________________________________________________________ 5-22
Disable ECHO Ports _______________________________________________________ 5-22
Enable Enhanced Password_________________________________________________ 5-22
Disable Port 77F0 (Hex) ____________________________________________________ 5-22
Factory Defaults _____________________________________________________ 5-22
Channel 1 Configuration ____________________________________________________ 5-23
Channel 2 Configuration ____________________________________________________ 5-23
WLAN Settings ___________________________________________________________ 5-23
Expert Settings ___________________________________________________________ 5-24
Security Settings__________________________________________________________ 5-24
Email Settings____________________________________________________________ 5-24
Exit Configuration Mode _______________________________________________ 5-24
6: Configurable Pins 6-1
GPIO Pins ___________________________________________________________ 6-1
Features:_________________________________________________________________ 6-1
Control Protocol_______________________________________________________ 6-1
Guidelines ________________________________________________________________ 6-1
Commands _______________________________________________________________ 6-2
Examples____________________________________________________________ 6-4
7: Monitor Mode 7-1
Entering Monitor Mode via the Serial Port___________________________________ 7-1
Entering Monitor Mode via the Network Port_________________________________ 7-1
Monitor Mode Commands_______________________________________________ 7-2
8: Updating Firmware 8-1
Obtaining Firmware____________________________________________________ 8-1
Reloading Firmware ___________________________________________________ 8-1
Using TFTP: Graphical User Interface __________________________________________ 8-1
Using TFTP: Command Line Interface __________________________________________ 8-2
Recovering the Firmware Using the Serial Port ___________________________________ 8-2
9: Troubleshooting 9-1
Problems and Error Messages ___________________________________________ 9-1
Technical Support _____________________________________________________ 9-4