Filter
Top Products
Configuration Using Web-Manager
WiPort™ User Guide 4-13
Recipients
Recipient 1: Email
Address
Enter the email address designated to receive email
notifications.
Recipient 2: Email
Address
Enter an additional email address designated to receive email
notifications.
Trigger Configuration
A trigger event occurs when the unit receives the specified trigger input as a result of
a specified combination of conditions on the configurable pins.
Set the configurable pins to Active, Inactive, or None. The configurable pins are
disabled if they are all set to None. If both the serial sequence and the configurable
pins are disabled, the trigger is disabled.
To configure the WiPort’s email trigger settings:
1. From the main menu, select Trigger 1, Trigger 2, or Trigger 3 to configure the
desired Trigger settings. The Email Trigger Settings page opens.
Figure 4-9. Email Trigger Settings
2. Configure the following fields:
Conditions
Configurable Pins Select the condition from the pull down menu for the
configurable pins. Repeat for each Trigger Input field.
Enable Serial Trigger
Input
When selected, specified serial communications count as a
trigger input.