Filter
Top Products
4: Configuration Using Web Manager
Figure 4-3. Network Settings
Network Mode
1. Click Network from the main menu.
2. Note the following:
Network Mode
Wired Only is the only choice. It enables the Ethernet network
connectivity.
Automatic IP Address Configuration
An IP address can be assigned automatically. You then enter related network
settings.
To assign an IP address automatically:
1. On the main menu, click Network.
2. Select Obtain IP address automatically.
3. Enter the following (as necessary):
BOOTP
Select Enable to permit the Bootstrap Protocol (BOOTP).
server to assign the IP address from a pool of addresses
automatically. Enable is the default.
DHCP
Select Enable to permit the Dynamic Host Configuration
xPico User Guide 20