Filter
Top Products
1. Using This Guide
Purpose and Audience
This guide covers xPico Device Server Module. It provides the information needed to
configure, use, and update the xPico firmware and is intended for OEMs and system
integrators who are embedding the xPico in their end product designs.
Chapter Summary
The remaining chapters in this guide include:
Document
Description
2: Introduction
Describes the main features of the xPico and the protocols
it supports.
3: Using DeviceInstaller
Provides information for getting your unit up and running,
using DeviceInstaller to assign an IP address.
4: Configuration Using Web
Manager
Details using the Web-Manager to set parameters such as
port and server properties.
5: Configuration via Telnet or
Serial Port (Setup Mode)
Provides instructions for accessing Setup Mode (command
line interface) using a Telnet connection through the
network or a terminal or terminal emulation program
through the serial port.
6: Setup Mode: Server
Configuration
Details the network (server) settings
7: Setup Mode: Channel
Configuration
Details the serial port settings.
8: Setup Mode: Advanced
Settings
Details expert and security settings and explains how to
reset the unit to factory default values.
9: GPIO Interface
Provides instructions for configuring the eight General
Purpose I/O pins (CP1-8).
10: Firmware Upgrades
Provides instructions for obtaining the latest firmware and
updating the xPico.
11: Monitor Mode
Provides instructions for accessing and using the
command line interface for monitoring the network and
diagnosing problems.
12: Troubleshooting
Describes common problems and error messages and how
to contact Lantronix Technical Support.
A: Binary to Hexadecimal
Conversions
Provides instructions for converting binary numbers to
hexadecimals.
B: Compliance
Provides compliance information.
xPico User Guide 9