XPort® Pro Lx6 Embedded Device Server User Guide 12
2: Introduction
The XPort Pro Lx6 embedded Ethernet device server is a complete network-enabling solution in a
30 (1.181) X 55 (2.165) X 6.45 (0.248) package. This miniature device server empowers original
equipment manufacturers (OEMs) to go to market quickly and easily with Ethernet networking and
web page serving capabilities built into their products.
Key Features
Power Supply: Regulated 3.3V input required. There is a step-down converter to 1.5V for the
processor core and 1.8V for the memory subsystem. All voltages have LC filtering to minimize
noises and emissions.
Controller: MCF520X microprocessor running at 166.67 megahertz (Mhz) with 8 Kilobyte
(KB) Configurable Cache.
Memory: Up to 16 MB SDRAM, 16 MB Flash and 16KB Internal SRAM.
Ethernet: 10/100 megabits per second (Mbps) Ethernet transceiver.
One 10Base-T or 100Base-TX Ethernet Port
Serial Ports: One high speed RS232/RS485 serial port baud rate support from 300 to
921600. Baud rate of 460800 is not supported
Interface Signals: 3.3V-level interface signals.
Configurable IO Pins (CPs): Up to three pins are configurable as general purpose I/Os if no
modem control signal is used on serial ports. Not 5V tolerant.
Configuration via CLI, XML and HTTP.
Temperature Range: Operates over a temperature range of -40°C to +85°C (-40°F to 185°F).
The storage temperature range is -40°C to 85°C (-40°F to 185°F).
Applications
The XPort Pro Lx6 embedded device server connects serial devices such as those listed below to
Ethernet networks using the IP protocol family.
ATM machines
CNC controllers
Data collection devices
Universal Power Supply (UPS) management unit
Telecommunications equipment
Data display devices
Security alarms and access control devices
Handheld instruments
Modems
Time/attendance clocks and terminals