Filter
Top Products
2: Introduction
XPort® Pro Lx6 Embedded Device Server User Guide 13
Patient Monitoring Devices
Glucose Analyzers
Infusion Pumps
Protocol Support
The XPort Pro Lx6 embedded device server contains a full-featured IP stack. Supported protocols
include:
ARP, SNMP v1/v2c/v3, IPv4, IPv6, UDP, TCP, ICMP, BOOTP, DHCP, DHCPv6, Auto IP,
Telnet, and FTP
DNS, TFTP, and Syslog for network communications and management.
TCP, UDP, and Telnet tunneling to the serial port.
TFTP for uploading/downloading files.
FTP and HTTP for firmware upgrades and uploading/downloading files.
Troubleshooting Capabilities
The XPort Pro Lx6 offers a comprehensive diagnostic toolset that lets you troubleshoot problems
quickly and easily. Available from the CLI or Web Manager, the diagnostic tools let you:
View memory and IP socket information
Perform ping and traceroute operations
Conduct forward or reverse DNS lookup operations
View all processes currently running on the XPort Pro Lx6, including CPU utilization
View system log messages
Configuration Methods
After installation, the XPort Pro Lx6 requires configuration. For the unit to operate correctly on a
network, it must have a unique IP address on the network. There are four basic methods for
logging into the XPort Pro Lx6 and assigning IP addresses and other configurable settings:
Web Manager: View and configure all settings easily through a web browser using the
Lantronix Web Manager. (See “Configuration Using Web Manager” on page 18.)
DeviceInstaller: Configure the IP address and related settings and view current settings on
the XPort Pro Lx6 using a Graphical User Interface (GUI) on a PC attached to a network. You
will need the latest version of Lantronix® DeviceInstaller™ utility. (See “Using DeviceInstaller”
on page 16.)
Command Mode: There are a few methods for accessing Command Mode (CLI): making a
Telnet connection or via the serial port (when configured accordingly). (See the XPort Pro Lx6
Embedded Device Server Command Reference Guide for instructions and available
commands.)