Filter
Top Products
XPort® Pro Lx6 Embedded Device Server User Guide 18
4: Configuration Using Web Manager
This chapter describes how to configure the XPort Pro Lx6 embedded device server using Web
Manager, the Lantronix browser-based configuration tool. The unit’s configuration is stored in non-
volatile memory and is retained without power. All changes take effect immediately, unless
otherwise noted. It contains the following sections:
Accessing Web Manager
Web Manager Components
Navigating Web Manager
Accessing Web Manager
Note: You can also access the Web Manager by selecting the Web Configuration tab on
the DeviceInstaller application window.
To access Web Manager, perform the following steps:
1. Open a standard web browser. Lantronix supports the latest versions of Internet Explorer,
Mozilla Firefox, Safari or Chrome web browsers.
2. Enter the IP address or hostname of the XPort Pro Lx6 in the address bar. The IP address
may have been assigned manually using DeviceInstaller (see the XPort Pro Lx6 Embedded
Device Server Quick Start Guide) or automatically by DHCP.
3. Enter your username and password. The factory-default username is “admin” and “PASS” is
the default password. The Device Status web page displays configurations including network
settings, line settings, tunneling settings, and product information.