Device Installer
2. Click the NET485 Software button.
3. Device Installer requires Microsoft .NET Framework be installed on your system. If your system does
not have this installed, click the NET Framework button to install it.
4. Click the Device Installer button. The installation wizard window displays.
5. Respond to the installation wizard prompts.
Note: For more information about Device Installer, see the Device Installer User Guide on the product CD and the online
help.
6. Restart your system.
3.1.3 RUN Device Installer
Click the Start button on the Task Bar and select Programs\Lantronix\DeviceInstaller. From the list of
options, select DeviceInstaller. The Device Installer main dialog box appears.
Figure 8 - Device Installer Dialog Box
Device Installer automatically locates and displays devices on the network. To search for devices recently
added to the network, click the icon
, select Search from the Device menu or press the F5 key.
3.1.4 Device Found
Figure 8 shows a device found on the network, with the IP addresses assigned by the DHCP server. The
device IP Address is normally set to 0.0.0.0 at the factory. The Hardware Address is an individual
permanent address assigned to a particular device on the network. The Hardware Address can be found on
the product label.
To change the IP address, first select the device from the list. Notice that the Upgrade icon appears on the
toolbar when you select a device.
3-2 NET485 User Guide