Lantronix 485 Network Card User Manual


 
Device Installer
3.1.5 Assign IP
Click the Assign IP icon , select Assign IP Address from the Device menu or press the F7 key.
You are then asked to select an assignment method. To assign a specific IP address, select the Assign a
specific IP address button in the dialog box. Click Next to continue.
If you choose to obtain an IP address automatically, select Obtain an IP address automatically button.
The IP Discovery Settings dialog appears. Choose from DHCP, BOOTP and Auto-IP protocols to obtain
the IP address. Skip to Assignment on page 3-4.
Enter the IP address, the Subnet mask and the Default gateway in the IP Settings dialog box. In the
following example, the new IP address is 172.20.206.150. Press the TAB key to advance to the next field.
The Subnet mask will be filled in automatically. On a local network, you can leave the Default gateway
blank (all zeros). Click the Next button to continue.
NET485 User Guide 3-3