Lantronix 485 Network Card User Manual


 
Device Installer
3.8 Email Settings
An XPort can send an email to multiple recipients when a specific trigger event occurs. There are three
separate triggers, based on any combination of the configurable pins selected as user I/O functions.
Optionally, use a two-byte serial string to initiate a trigger. Each trigger is independent of the others. Each
condition within an individual trigger must be met before the unit will send the email.
Note: Using configurable pins for Email is not supported on the NET485.
To configure the NET232’s email settings:
1. On the main menu, select Email. The Email Settings window opens.
2. Configure the following fields:
Server IP Address
Enter the IP address of the mail server.
Server Port
Enter the port number on the email server.
Domain Name
Enter the email server’s domain name.
Unit Name
Enter the user name used by the XPort to send email messages.
Recipients
Recipient 1: Email
Address
Enter the email address designated to receive email notifications
Recipient 2: Email
Address
Enter an additional email address designated to receive email
notifications.
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
3-18 NET485 User Guide