Lantronix 10 Network Card User Manual


 
Introduction
UDS-10 User Guide 1-3
1.2 UDS-10B
Note: This section is for the UDS-10B only.
The UDS-10B is the embedded version of the UDS-10, and is designed to be easily and
quickly integrated into products. The UDS-10B operates the same as the UDS-10, except the
UDS-10B has no external metal case. Serial interface is accomplished via a female DB25
(DCE) connector which provides the necessary signals for both RS232 and RS422/RS485
interfaces.
In addition, an RJ45 (10BASE-T) connector is available for Ethernet access. It will support
network speeds of 10Mbps.
The UDS-10B board comes with various power supply options:
a power jack for 9-30 VDC or 9-24 VAC with maximum 140mA.
power via the DB25 inputs at either the regulated +5 VDC with maximum 200mA or
the unregulated 9-30 VDC.
The UDS-10B’s well-developed IP firmware supports protocols such as ARP, UDP, TCP,
Telnet, ICMP, SNMP, BOOTP,DHCP, TFTP, AutoIP, HTTP, and custom protocols.
Note: Please see the EIK, Embedded Integration Kit user manual, 900-226, for information
on using the UDS-10B Embedded Device Server.