Filter
Top Products
Configure
UDS-10 User Guide 3-11
*** basic parameters
Hardware: Ethernet Autodetect
IP addr – 0.0.0.0/DHCP/BOOTP/AutoIP, no gateway set
DHCP device name : not set
***************** Security *****************
SNMP is enabled (not IAP firmware)
SNMP Community Name: (not IAP firmware)
Telnet Setup is enabled
TFPT Download is enabled
Port 77Feh is enabled
Web Server is enabled
Enhanced password is disabled
***************** Channel 1 *****************
Baudrate 9600, I/F Mode 4C, Flow 00
Port 10001
Remote IP Adr: --- none ---, Port 00000
Connect Mode : C0 Disconn Mode: 00
Flush Mode : 00
****************** Expert *******************
TCP Keepalive : 0s (not IAP firmware)
Change Setup :0 Server configuration
1 Channel 1 configuration
5 Expert settings (not IAP firmware)
6 Security
7 Factory defaults
8 Exit without save
9 Save and exit Your choice ?
Figure 13 - Setup Mode Window