Filter
Top Products
Getting Started
2-10
UDS-10 User Guide
2.4.5 Opening a Configuration Window
1. Click the Manage icon . The Device Management window displays.
Figure 10 - Device Management Window
2. Do one of the following:
Note: To assign Expert settings and Security settings, you must use the Setup Mode window
in a Telnet session.
• To configure the unit via a Web browser, click the Web Configuration icon
.
The Lantronix Web-Manager window displays in your browser. For Web
Configuration, see Web Manager Page on page 3-4.
• To configure the unit via a Telnet session, click the Telnet to Device icon
.
The Setup Mode window displays. For Telnet Configuration, see Using a Telnet
Connection on page 3-10
3. Continue with the appropriate configuration procedure described in the next chapter.
Note: The Get Configuration icon on the Device Management window allows you to save a
configuration locally on your computer as a file. The Set Configuration icon sends a saved
file to the unit.
To Get Configuration information see Get Configuration on page 3-27. To Set
Configuration of a specific device see Set Configuration on page 3-28.