Filter
Top Products
4: Configuration Using Web-Manager
UDS1100 User Guide 34
Device Address Table
The table is enabled when Datagram Type is set to FD. Enter
values between 1 and 255 to identify units on the local
network of device servers.
Note: Lantronix Tech Support supports Datagram type 01.
Datagram Type FD is for OEM use.
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
Apply Settings
1. To save and apply the configuration changes to the device server, click the
Apply Settings button.
Note: Clicking OK on each page does not change the configuration on the device.
OK tells the UDS1100 what changes to use; Apply Settings makes the changes
permanent and reboots the UDS1100.
Apply Factory Defaults
1. Click the Apply Defaults button to set the device server back to the default
settings. For details see Default Settings on page 58.
2. Click Yes to set factory settings, or click No to cancel.