Filter
Top Products
UDS1100 User Guide 7
1
1
:
:
U
U
s
s
i
i
n
n
g
g
T
T
h
h
i
i
s
s
G
G
u
u
i
i
d
d
e
e
Purpose and Audience
This guide provides the information needed to configure, use, and update the
UDS1100 device server. It is for system administrators and those responsible for
installing and maintaining the UDS.
Chapter Summary
The remaining chapters in this guide include:
2: Introduction
Describes the main features of the UDS and the protocols it
supports.
3: Getting Started
Provides information for installing your unit and getting it up and
running using DeviceInstaller or a serial port connection.
4: Configuration Using Web-
Manager
Details using the Web-Manager to set parameters such as port
and server properties.
5: Configuration via Telnet or
Serial Port (Setup Mode)
Provides instructions for accessing Setup Mode (command line
interface) using a Telnet connection through the network or a
terminal or terminal emulation program through the serial port.
6: Setup Mode: Server
Configuration
Details the network (server) settings
7: Setup Mode: Channel
Configuration
Details the serial port settings.
8: Setup Mode: Advanced
Settings
Details expert and security settings and explains how to reset
the unit to factory default values.
9: Firmware Upgrades
Provides instructions for obtaining the latest firmware and
updating the UDS.
10: Monitor Mode
Provides instructions for accessing and using the command line
interface to monitor the network and diagnose problems.
11: Troubleshooting and Contact
Information
Describes common problems and error messages and how to
contact Lantronix Technical Support.
12: Connections and Pinouts
Provides descriptions and illustrations of connection
hardware.
13: Technical Specifications
Lists technical specifications for the UDS.
A: Alternative Ways to Assign an
IP Address
Provides detailed information about using DHCP, AutoIP,
BOOTP ARP, and Telnet to assign an IP address.