Filter
Top Products
UDS1100 User Guide 73
1
1
3
3
:
:
T
T
e
e
c
c
h
h
n
n
i
i
c
c
a
a
l
l
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
Table 13-1. UDS1100 Technical Specifications
Category Description
CPU Lantronix DSTNI-EX 48 MHz clock
Internal CPU Memory 256 KB zero wait state SRAM
Flash 2 MB Flash
EEPROM 2 KB EEPROM
Serial Interface 1 DB25F DCE serial port
Software-selectable baud rate from 300 to 230 KBaud
Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)
Serial Line Formats Characters: 7 or 8 data bits
Stop bits: 1 or 2
Parity: odd, even, none
Modem Control DTR, DSR
Flow Control Hardware: CTS/RTS
Software: XON/XOFF
Power Input 9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum consumption)
9-30 VDC on DB25F serial interface
Network Interface 1 RJ45 10Base-T/100Base-TX Ethernet port
Software selectable Ethernet speed 10/100/Auto
Software selectable Half/Full/Auto duplex
Dimensions Height: 2.3 cm (0.9 in)
Width: 6.4 cm (2.5 in)
Depth: 9.0 cm (3.5 in)
Weight 0.20 kg (0.45 lb)
Temperature Operating range: 5° to +50° C (41° to 122° F)
Storage -40° to 66° C (-40 to 151° F)
Relative Humidity Operating 10% to 90% non-condensing, 40% to 60% recommended
Storage 10% to 90% non-condensing
Case Metal enclosure with integrated wall mounts
Optional 35 mm Din Rail mount available
Protocols Supported ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, and HTTP
Installable Industrial
Protocols
ModBus TCP, ModBus ASCII/RTU, DF1 Multi-Master (IAP version only)
Management Internal web server
SNMP (read only)
Serial login
Telnet login