Filter
Top Products
7: Setup Mode: Channel Configuration
UDS1100 User Guide 53
disables the recognition of the characters. Alternatively, the unit can interpret two
characters as a sequence (see Pack Control on page 51). The default setting is 00.
Telnet Terminal Type
This parameter displays only if you enabled the terminal type option in Disconnect
Mode. With this option enabled, you can use the terminal name for the Telnet
terminal type. Enter only one name.
With terminal type option enabled, the unit also reacts to the EOR (end of record) and
binary options, useful for applications like terminal emulation to IBM hosts.
Channel (Port) Password
This parameter appears only if the channel (port) password option is enabled in
Disconnect Mode. With this option enabled, you can set a password on the serial
port. The default setting is all 0s.