Lenovo 09144DU Laptop User Manual

Ideapad Z560/Z565 Hardware Maintenance Manual
1190 Antenna assembly and LCD cover
For access, remove these FRUs in order:
“1010 Battery pack” on page 40
“1020 Dummy cards” on page 41
“1030 Hard disk drive (HDD)/Memory/CPU (Central processing unit)/Mini
PCI ExpressCard slot compartment cover ” on page 42
“1040 Hard disk drive ” on page 43
“1050 Optical drive” on page 45
“1060 DIMM” on page 46
“1070 Fan assembly and Heat Sink assembly” on page 47
“1090 PCI Express Mini Card for wireless LAN/WAN” on page 51
“1100 Keyboard” on page 53
“1110 Keyboard bezel” on page 55
“1130 System board and ExpressCard slot assembly” on page 60
“1140 LCD unit” on page 64
“1160 LCD front bezel” on page 70
“1170 LCD panel and hinges” on page 71
Figure 19. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the
cables from the cable guide, and then remove the antenna assembly in the
direction shown by arrows
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.