Filter
Top Products
14. Reinstall the battery. See “Replacing the battery” on page 67.
15. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing the Serial Ultrabay Slim device
To replace the Serial Ultrabay Slim device, do the following:
1. Turn off the computer, then disconnect the ac power adapter and all cables from the computer.
2. Unlock the bay lock latch and hold it in the unlocked position. Then, slide the bay eject latch in the
direction shown by the arrow, then pull out the Serial Ultrabay Slim device.
3. Insert the new device rmly into the bay; then press the device rmly to attach it to the connector.
Replacing the SIM card
Before you start, print these instructions.
92 User Guide