Filter
Top Products
4
4
4
5
5
6
8
7
7
9
Step Screw (quantity) Color
Torque
7
M2 × 4 mm, wafer-head, nylon-coated (2)
Black 0.181 Nm
(1.85 kgf-cm)
When installing:
• Make sure that you attach the LCD connector rmly.
• Make sure that you route the cables rmly and tape up in the proper positions as shown in this gure.
• When you route the cables, make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Chapter 9. Removing and replacing a FRU 95