Filter
Top Products
Notes:
• If only one DIMM is used on the computer you are servicing, the card must be installed in SLOT-0 a ,
but not in SLOT-2
b .
• If the computer you are servicing is a dual-core processor model, a dummy DIMM card is preinstalled in
SLOT-2 b . Do not replace the dummy DIMM card with a SO-DIMM.
When installing: Insert the notched end of the DIMM into the socket. Press the DIMM rmly, and pivot it
until it snaps into the place. Make sure that it is rmly xed in the slot and does not move easily.
1050 Hard disk drive slot cover, hard disk drive (HDD) and HDD rubber
rails or solid state drive (SSD) and storage converter
For access, remove this FRU:
• “1010 Battery pack” on page 66
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock.
Improper handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
Removal steps of hard disk drive slot cover, HDD and HDD rubber rails or SSD and storage converter
Note: Loosen the screw 1 , but do not remove it.
2
1
Chapter 9. Removing and replacing a FRU 71